5 years for Machinery and 2 years for instruments

Two Years from the date of installation.

Not more than 10 gm

Good quality knitted sleeve or non-woven fabric with sufficient porosity to permit assembled napkin to meet absorbency requirements, with non-absorbent barrier on one side having an identifying mark indicating barrier side

BIS 5405:2019

8 ± 2 mm

Back strip for sticking onto underwear using good quality adhesive material

Cellulose pulp/wadding, free from lumps, oil spots, dirt or foreign material

70 to 85 mm

60 to 75 mm

210 ± 10 mm

230 ± 10 mm

Individual non-transparent pouch/wrapper of the size of Sanitary Napkin with adhesive to seal within, as per MoEFCC notification dated 08.04.2016, with Hindi instructions

56cm x 45cm (Adhesive Area)

Available in sizes ranging from: 18 Fr, follows international color-coded system

3-0

1

4/0

11

Breathable and conformable to skin, compatible with Povidone and CHG skin preps; iodine present in deepest skin layers (1000 microns depth)

Smooth, non-stick surface; Integrated silicone balloon for retention in the bladder; Radiopaque stripe throughout catheter length for X-ray visibility; Standard (rounded) tip; Large symmetrical drainage eyes; Universal funnel-shaped connector

Radio Opaque tip, Hydrophilic coating

Standard connectors for use with a variety of ventilators; Ported wyes allow pressure sensing and temperature monitoring and include tethered caps; Straight connector inspiratory limb water Trap (for use with HMEs only)

Polyester film with an acrylic adhesive containing a complex of iodoform (N-vinyl 2 pyrrolidine)

100% medical-grade silicone, Biocompatible and non-reactive, Latex-free

Nitinol braiding

SEBS material not PVC

US-FDA approved

Gamma sterile

Class 'D' medical device with CDSCO India

0.092 mg iodine/cm2

2-way Foley catheter

Adult Conventional Single Water Trap (non-heated) Ventilator Circuits

Two tip, straight tip compatible with 0.014" micro-wire, Radio opaque tip

Hydrophilic coating

Purest form of Triclosan 97-103% & above

0.017-0.015

2.1 - 2.4 & 1.7 Fr.

5mm to 10mm, 10.1mm to 20mm, 20.1mm to 30mm, 30.1mm to 40mm, 40.1mm to 50mm

Absorbable 5 mm Hernia mesh fixation device 30 screw shaped with proximal wings of PGLA tacks of 4-5 mm (Should not more then 5 mm) length along with flexible shaft up to 3 cm

Absorbable 5 mm Hernia mesh fixation device 15 screw shaped with proximal wings of PGLA tacks of 4-5 mm (Should not more then 5 mm) length along with flexible shaft up to 3 cm

USFDA/CE certificate with notified body

CE/ISO/US FDA certified or as per WHO Specification

US-FDA/ EU CE (four digit notify)/ ISO

Universal linear cutter cartridge 55-60 mm for open linear cutter compatible with selectable staple height linear cutter 55-60 mm

Compatible with 0.007-0.010 & compatible with DMSO

6 Rows 3-D staple technology

1.5mm/1.8mm /2mm in one cartridge only

1.2 to 1.8 F

2.4 F

Extruded construction

2.7 F

155 to 180

0.009 - 0.013

Unique single-shutter valve system for reliable functionality & Swivel between valve and mask permits 360° positioning in relation to the patient

Thin-walled compression bag with hand strip

Neonate (220-300ml) (including reservoir and mask)

70-72 inch long

70cm

75-100 cm

76 cm

14 to 36 mm

500 ml bottle

1 Litre Pack

5Lt. Pack

Not Less Than 34.0% w/v

3%w/w

70%

10cm x 10cm

75mg

45mg

Grade 3

IS 1061:1997 (Amended From Time To Time)

IS 1061:1997, (Amended From Time To Time)

ISI Marked IS No. 3319-1995 and amended up to date

5

Violet 1/2 circle Taper Point, 17-20 mm needle

1/2 Cir RB Heavy Needle 40-45mm

3/8 Cir R Cutting Needle 16-19mm

NRR-16 Absorbable surgical suture sterilized surgical needled suture monofilament Polydioxanone Coated with Purest form of Triclosan 97-103% & above, Violet 1/2 circle Taper Point, 17-20 mm needle, length 70cm Size 3-0

R-34 Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir RB Heavy Needle 40-45mm Length 75-100 cm) Size 1

R-80 Absorbable Surgical Suture (Sterile catgut), Needled suture chromic (3/8 Cir R Cutting Needle 16-19mm Length 76 cm) Size 4/0

Vascular Catheter with metal Guide wire 3Fr single lumen, micro introducer, contrast Media compatible, Size 45cm or more (Logline IV.) USFDA/ four digit notified CE approved Syringe 12 ml, 2 ml, Internal stylet, Measuring Tape, Stat lock catheter Stabilization device (Suture less), Introducer safety peripheral IV catheter 20G, Micro introducer with Vessel Dilator, Guide wire-50 Cm Nitinol, Needle introducer 21 G, Safety Scalpel, End Cap Size 45cm

Vascular Catheter with metal Guide wire 5Fr Double lumen, Introducer safety PIV Catheter20G, 45cm or more (Logline IV.) USFDA/ four digit notified CE approved Syringe 12 ml, Internal stylet, Measuring Tape, Stat lock catheter Stabilization device (Suture less), Introducer safety peripheral IV catheter 20G,Micro introducer with Vessel Dilator, Guide wire-50 Cm Nitinol, Needle Introducer 21 G,Safety Scalpel, End Cap. Size 45 cm

Ethanol 80% (V/V), Glycerol 1.45% (V/V), Hydrogen Peroxide 0.125% (V/V)

Can Of 5 Ltr Pack

5Lt. Pack

Bottle Of 500ml

Positive and negative controls sufficient for conducting 20% of the tests (10% negative and 10% positive controls)

Surface antigen to Hepatitis B virus

Not more than 50 tests, individually packed

Minimum shelf life of 60% or 12 months (whichever is more) at port/place of discharge

100%

>= 98%

Monoclonal antibodies covering all subtypes and variants of HBsAg

Approval of statutory authority from country of origin; registered/licensed by DCG(I) for imported or competent authority under Drugs and Cosmetics Act (1940) and Medical Device Rules 2017 for indigenous

Plasma and serum both

Not more than 30 minutes

Cold chain at 2-8°C with cumulative time temperature indicator (pre-qualified by WHO)

Re-usable

Clear and Transparent

Small, Medium

Polycarbonate

Yes

Yes

Medical Safety Goggle

Yes

ISO:13485 (Latest)

Yes

Yes

Yes

Yes

Yes

Yes

Screw Cap, Snap Cap

0.2ml, 0.5ml, 1.5ml, 2ml, 5ml, 6ml, 8ml, 10ml, 15ml, 25ml, 30ml, 35ml, 40ml, 45ml, 50ml, 100ml

40mm to 50mm, 50.1mm to 60mm, 60.1mm to 70mm, 70.1mm to 80mm, 80.1mm to 90mm, 90.1mm to 100mm, 100.1mm to 110mm, 110.1mm to 120mm, 120.1mm to 130mm

Transparent polypropylene lab containers, available sterile or non-sterile, with conical or round bottoms, leak-proof caps, withstand high centrifugal forces, and are used for sample separation and storage.

up to 3000 Xg, up to 6000 Xg, Up to 10000 xg, up to 15000 Xg, Up to 20000 Xg

2.5 mm, 3mm, 4 mm