CMC for 5 years (Ist to 5th Year as per BOQ)

5 years (CMC for 1st to 5th Year listed in BOQ format)

5 years CMC (quoted year-wise for 1st to 5th year in BOQ)

5 years CMC (CMC for 1st Year to 5th Year following warranty)

CMC for 5 years (1st to 5th year) post-warranty

CMC for 5 years after warranty

CMC for 5 years (Ist to 5th Year) quoted in BOQ

CMC for 5 years as per BOQ format

Comprehensive Maintenance of Five Years

CMC for 5 years post warranty (1st to 5th year)

5 years CMC post-warranty (CMC for Ist Year to 5th Year as per BOQ format)

5 years CMC post-warranty (Ist to 5th Year as per BOQ)

5 years CMC (CMC for 1st Year, 2nd Year, 3rd Year, 4th Year, 5th Year)

5 years CMC (quoted on yearly basis from 1st to 5th year)

5 years CMC after expiry of warranty period

5 years post-warranty (CMC for 1st to 5th Year)

5 years CMC quoted in BOQ (not considered for L1 evaluation)

CMC for 5 years (Ist to 5th Year) quoted separately in BOQ

Price should be freezed for min 5 years for disposable patient circuit with humidifier chamber

O2 sensor to be covered under warranty and CAMC or paramagnetic under CAMC. Rates of disposable ventilator tubings humidifier assemblies should be fixed for a minimum of 5 years.

Prices of consumables and accessories should be quoted separately in the financial bid. The company should ensure the supply of consumables and accessories for a period of 5 years.

CMC will be given @ 3% of net rate excluding GST (as applicable) and yearly escalation of 5% on last year's CMC price for 5 years after guarantee period of 2 years

CMC shall be given @ 5% of net rate (excluding GST as applicable) and yearly escalation of 5 % on last year’s CMC price. The CMC may be awarded for five years (on yearly basis) after Guarantee period of three years.

CMC shall be given @5% of net rate (excluding GST as applicable)and yearly escalation of 5% on last year’s CMC price. The CMC may be awarded for three years (on yearly basis) after Guarantee period of three years.

Data of entire system usage or remote desktop tools or backup must not be routed or stored outside India during warranty, AMC, /CMC period; Parts of the system must be available at least 10 years from the date of commissioning.

CMC for Five years after expiry of warranty: 6th Year: 3304, 7th Year: 3717, 8th Year: 4130, 9th Year: 4543, 10th Year: 4956

5 years Comprehensive Maintenance Contract (CAMC) post-warranty, including helium, cold head repair/replacement, labour, and spares for complete system and accessories (UPS, generator, AC, batteries).

CMC will be given @ 5% of net rate inclusive of GST (as applicable) & yearly escalation of 5% on last year's CMC price. The CMC may be awarded for five years (on yearly) after completion guarantee period.

CMC will be given @ 5% of net rate inclusive of GST (as applicable) & yearly escalation of 5% on last year's CMC price. The CMC may be awarded for five years (on yearly basis) after completion guarantee period.

CMC will be given @ 5% of net rate - exclusive GST (as applicable) and yearly escalation of 5% on last year's CMC price. The CMC may be awarded for five years (on yearly basis) after completion of Guarantee period of three years.

CMC for five years after expiry of 5 years warranty: 6th yr Rs. 57000.00, 7th yr Rs. 57000.00, 8th yr Rs. 57000.00, 9th yr Rs. 57000.00, 10th yr Rs. 57000.00; Total: Rs. 285000.00

CMC for five years after the expiry of warranty period of 05 Five years

Comprehensive Maintenance Contract for 5 years after expiry of 5-year warranty: 6th yr=292500.00, 7th yr=292500.00, 8th yr=292500.00, 9th yr=292500.00, 10th yr=292500.00 (Total CMC amount: 1462500.00)

CMC for 5 years after 5 years warranty: 6th yr: Rs. 319000.00, 7th yr: Rs. 330000.00, 8th yr: Rs. 344000.00, 9th yr: Rs. 356000.00, 10th yr: Rs. 368000.00 (Total: Rs. 1717000.00)

6th yr: Rs. 59,910.72, 7th yr: Rs. 59,910.72, 8th yr: Rs. 59,910.72, 9th yr: Rs. 59,910.72, 10th yr: Rs. 59,910.72; Total for 5 years: Rs. 2,99,553.50 (after expiry of 5 years warranty)

CMC for five years post 5 years warranty: 6th yr Rs. 9947.40, 7th yr Rs. 9947.40, 8th yr Rs. 9947.40, 9th yr Rs. 9947.40, 10th yr Rs. 9947.40. Total: Rs. 49737.00

After expiry of 5 years warranty: 6th yr: Rs. 424723.00, 7th yr: Rs. 445964.00, 8th yr: Rs. 468962.00, 9th yr: Rs. 492410.00, 10th yr: Rs. 517030.00

CMC will be given @ 5% plus GST (as applicable) and yearly escalation of 5% on last year's CMC price. The CMC may be awarded for five years (on yearly basis) after guarantee period of three years, if required.

Warranty of 05 years shall be applicable for Machinery and Two years of instruments.

Five Years from the date of installation

05 years

Warranty of 05 years shall be applicable for Machinery and Two years of instruments

05 years shall be applicable for Machinery and Two years of instruments

05 years for Machinery and Two years of instruments

5 years for Machinery and 2 years for instruments

Three years on equipment from the date of installation.

One Year

Two Year

Two Years

2 Years

complete warranty of 05 years shall be applicable for the tendered items

at least 3 years standard warranty

5 years for Machinery / 2 years for instruments

Items covered under warranty/CMC: supply of consumables and accessories for a period of 5 years.

Expiratory valve/cassette, Oxygen sensor, and flow sensors covered under warranty.

The heater should have lifetime warranty.

2 years from the date of installation

Three years on equipment from the date of installation

Warranty of Two years on complete system from the date of installation.

Minimum 3 years on all parts including vehicle, fabricated parts, blood collection equipments, other parts and accessories.

One year against any manufacturing defect from the date of installation

Data of entire system usage or remote desktop tools or backup must not be routed or stored outside India during warranty, AMC, /CMC period.

Five years from the date of installation

3 years including compressor

Comprehensive warranty shall include preventive maintenance including calibration as per technical/ service /operational manual of the manufacturer, service charges and spares. During the warranty period commencing from date of the successful completion of warranty period, Service personnel shall visit each consignee site as recommended in the manufacturer's technical/ service /operational manual, at least once in six months. warranty shall not be including the consumables. Further there will be 98% uptime warranty during warranty period on 24 (hrs) X 7 (days) X 365 (days) basis, with penalty, to extend warranty period by double the downtime period.

5 years comprehensive warranty commencing from the date of handing over, covering complete system, all coils, accessories (UPS, AC, generator), third-party items, helium supply, and cold head repairs/replacement.

02 years

Two Years from the date of installation

Two Years from the date of installation.

5 Years from the date of installation (onsite comprehensive including spares)

Three years from the date of installation

Radial tyre with tube or tubeless 215/75 R17.5

Minimum 6 KMPL

More than 600kg

Not less than 1500 kg

Power steering system only

Monocoque/Chassis

7 KVA Genset with air conditioning compressor drive Auxiliary engine

3,000 to 4,000mm

Independent or semi elliptic at front and semi elliptic at rear

Diesel engine, 4 cylinders

BS-VI OBD –II

CPCB –IV+

300Nm and above

2,500 to 3,500cc

AC should be with heating inbuilt Engine Driven; Split AC System of 1 Ton capacity in patient compartment

Minimum 5 tonne AC, engine driven; and Minimum 2 tonne AC (condenser coil material-Copper), Alternative current driven with 5 star BEE rating; to maintain 15°C to 25°C

Minimum 150 mm

Not less than 180 mm

Minimum 4 passenger carrying capacity apart from driver and medical person

15 cubic meters and above (Length >= 4800mm, Width >= 1900mm, Height >= 1800mm)

90 to 120 litre

Not less than 70 litres

Length: 6,000 mm to 7,500mm; Width: 1,900 to 2,500mm; Height: 2,500 to 3,500mm

5,500 kg above

110 HP & above

Microscope with Light Source (Binocular), Sterilizer 38 cms with Electric Drum, Haemoglobinmeter, Centrifuge Mini, Incubator (20 L), Glucometer, Torch & Spotlight, Refrigerator (40-50 L), Needle cutter, Fully automated Auto Analyzer (>=200 tests/hr), ECG Machine (12 channel), Ultrasound Machine - Portable (Color Doppler echocardiography system), Foldable stretcher, Examination table, BP Apparatus, Stethoscope, Dressing Drum, Auto pipettes, etc.

Class II Type B-2 for BSL-III work

DC Battery operated replaceable, Portable IOPA X-Ray Machine

Auto-Clavable Hopkins 2 Fiber optic light transmission incorporated

Double ended

Sinsky type

Berke

Straight/Curved

up-cutting/down-cutting

Surgical light unit with Electronics control, for homogeneous and shadowless light with minimum temperature rise

HL-7 Compatible

Compatible with the same screen

5 KVA TO 100 KVA

1000mA

50 KVA at 0.8 pf 415V 50Hz 3-Phase

250 L, double door(preferred) with hinges, lockable preferred

At least 300 Whole Blood standard blood bags / 250 double bag with Whole Blood standard blood bags

4 KW

plastic coated, flexible highly tear resistant, anti-static, flame retardant, disinfectant- and liquid proof, washable

Four fixed rubber handles

Chrome plated two Arm handles

aluminum

SS 304 grade stainless steel

7.4 kg

150 kg

210-235 x 11-14 x 51-54cm (l*h*w)

Five legs plastic base mounted on 5 cms dia castors

Five leg chrome plated steel of proper guage base with castors (min 50mm) antistatic of high quality

Foot-controlled hydraulic, three-spindle base

Two 375 mm S.S. basin

Epoxy Polyester Powder min 60 microns

Epoxy/powder coated body, PU coating for plastic

16 mm x 1.22 mm ms tube

25.4 mm x 1.2 mm

four 125 mm dia. castor with synthetic body (two with brakes, two without)

10 cm to 12.5cm diameter with heavy duty swiveling castors and 2 wheels with brakes

Heavy Duty Lockable Castors

SS 304 grade stainless steel / MS tubular frame epoxy powder coated

Stainless Steel

S.S. Grade 304/18/8

Flame-retardant material

Rexine covered 50mm thick mattress made from PU foam 40 density, two sections

Translating and 360 degree rotating mattress, firm antibacterial fire retardant soft mattress

foam mattress of 4 sections, 4 inch thick PU foam of 40 density covered with soft water proof material, bacteriostatic & pillow

1905 mm L x 710 mm W x 660 mm to 910 mm H

1905 mm L x 770 mm W x 660 mm Min. H. and 910 mm Max. H.

18° or more

Foot operated hydraulic pump, actuation stroke length 140 mm with push force 10KN at 270 bars

Minimum height 900-1200 +/- 20mm; Maximum height 1500-1700 +/- 20mm from floor

1785 mm L x 555 mm W

165 kgs

1830 mm L x 555 mm W

minimum 18° or more

135 kgs

Max. Size (LxWxH) 210x42x6cm & Min. Size (LxWxH): 120x42x9cm

LxWxH (min): 184x45x5 cm

Seat size: 500±10 mm(D) X 500±10 mm(W); Back size: 450±10 mm(W) X 760±10 mm(H) from seat; Overall height: 1190±10 mm; Base width/depth: 760±10 mm

Length not less than 6500 mm, Width not less than 1800 mm, Height not less than 1980 mm, Wheel Base not less than 3600 mm

160 kg

Adjusting non slippery leg rest via gas jack, flexible from 0° to 45° (min)

Adjusting back rest via gas jack, flexible from 90° and above

Dynamic 150kg

Padded seat, back and adjustable armrests (sliding as well as up and down)

Three seater bench should have stabled and balanced legs

Black integral 3D adjustable polyurethane arm having sliding, up-down, to & fro motion

Two piece injection moulded polypropylene net cover upholstered with breathable mesh tapestry with cushion base adjustable lumbar support

15mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m3 with fabric tapestry; base supplied with PP cover

High back chair with ergonomic design

Should be vertical in design

Pneumatic seat height adjustment up to 100mm with BIFMA standard class-3 gas-lift, tested as per ANSI/BIFMA X5.1-2011 standards

Five legged injection moulded in 30% glass filled nylon having pitch circle dia. 660 mm fitted with 5 nos. twin wheel castors conforming to ANSI/BIFMA standards X5.1 2011 tested 98,000 cycles with 250 lbs load

Synchro tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment

ANSI/BIFMA, IDM (India Design Mark), ISO-9001:2015, ISO-14001:2015, ISO-45001:2018, ISO 50001:2018

USFDA and European CE or USFDA and CDSCO or USFDA and BIS certified

USFDA and European CE or USFDA and CDSCO or USFDA and BIS certified; ISO 9001 & ISO 13485

USFDA and European CE or USFDA and CDSCO or USFDA and BIS certified; ISO 9001:2008 and ISO 13485:2003

European CE (Four digit notified body) / USFDA / BIS approved; valid CDSCO License

USFDA certified / European CE certified (from 04 digit notified body) / BIS certified; valid CDSCO registration

ISO 13485, IEC 60601, valid CDSCO License

CE and IVD/USFDA Approved

CE and IVD/USFDA approved

ISO 13485, European CE (Notified Body) / US FDA / BIS, IEC 60601-1, CDSCO approval

ISO & European CE certified

US FDA or CE certification; ISO certification

Conforming to ANSI AAMI ST8 / EN285, USFDA approved / European CE approved, ASME Pressure Vessel, ANSI/UL 61010-1, TUV/PED Pressure equipment Directive 2014, ISO 13485:2016

minimum 150 Kg

Two arm rest processed with 1.6mm MS Steel & Furnished with powder coating

Leveler shoe provided with metal insert at the bottom to avoid scratches on the floor

Seat and back processed with 1.2mm thick MS Sheet furnished with powder coating of 50 microns and padded with 25mm thick High resilience PU foam of 40 density 40

supplied in knocked down conditions, easy to assemble

raised by ratchet mechanism having five different positions as 25°, 35°, 45°, 55° & 65°

Adjustable contoured backrest

Provision to hold IV poles on all the four corners should be provided

MS press bent 25 mm x 25 mm x 2.0 mm (14 G) angles and 'C' channels riveted to angles made from 2.0 mm (14 G) MS CRCA Sheet

Portable lightweight Tripod Stand with vertical movement range (50-150 cm), rotation 360 degrees around vertical axis

Stand which can be detachable for independent operation

less than or equal to 17 kg including batteries

upto 2.6 kg or less

Heavy weight

250 Gms

digital or touch screen display of size 2 inch or more

TFT touch screen of 12 inches or more with tilt & rotate facility

Colour display TFT-Screen 7 inches and above centrally located

Colour display more than 4" touch screen to monitor humidity setting, flow, FiO2 and faults

High resolution virtual real tissue anatomy life size with a minimum 84" both horizontal and vertical display

Digital or dial gauge on screen of 3.0” or bigger displaying infused volume, infused time, inline pressure and battery remaining time

Portable full color TFT/LCD Display with minimum 80 degree field of view, dimension between 2.4 inches to 3.5 inches (Diagonal) attached to handle

Large 5" or more LCD Display for easy set up of wash protocols

integrated in one system for measurement of Cardio Pulmonary Exercise with display size of more than 22”

LCD / LED Touch sensitive 4.5" color display screen

Laptop with 14 inch screen, 11th or 12th Gen processor, >8GB RAM, 1TB SSD

0.4 mm to 0.8 mm or more with target angle 12 or more

0.4-0.8 mm

CE or FDA approved AI software, able to triage/report subjects as Normal, TB related abnormality, other abnormality; works offline and online; CDSCO license

140 microns or less

> 75%

> 80%

2 to 6 mAs or higher

40-100 kV (variable or fixed value within this range)

at least 350 X 400 or more mm

Minimum 4000 - 6000 Joule or more

16 bits or more

at least 2500 X 3000 pixels

2 sec or less

minimum 3.5 lp/mm or more

(a) Adjustable Volume Single Channel, (b) Adjustable Volume Digital Multi-Channel, (c) Electronic Multichannel

with turnkey

-86C

RT 537

RT 539

RT 534

RT546

6ft & Size 4 ft

2050mm (length) x 900mm (width) x 650mm (height) ±2% tolerance

Medium

6mm

Small

7"

No. 3 flat

10 inch

12 cms

15 cms

20 cms

3.5mm

2.5mm

9mm

11 mm

medium size

Class 2 / Type A2

12 Channel

8 measurement channel

Hemodialysis therapies such as HD, SLED, HDF and HF

Automatic disinfection with both chemical/hot-water and chemical-based decalcification of RO membranes

1000 Litres/Hr

Microprocessor/microcontroller controlled Dual stage RO water system

>= 99% for bacteria & endo-toxins and >= 96% for dissolved salts

1500 Litre

Dynamic saving of water up to 75% of overall RO plant

EU-CE / US-FDA / BIS, ISO 23500:2019, ISO 13485

21 to 100%

2 to 150 L/min or more

0 to 50 cmH2O

Assist Control, SIMV, PRVC, APRV, Volume Support, volume guarantee, Bi-level with PS, BIPAP/Bi-vent, Auto-mode/ASV/MMV

RS232 serial port

RS232 Port for data / Network Connection

Standalone compressor / integrated compressor with auto change over facility and central pipeline air supply (60psig)

Microprocessor / Computer controlled ventilator of latest technology

In-built O2 blender with sensor, 40 to 60 psi O2 supply source

Internal AC and in-built battery backup for minimum of 60-90 minutes

More than 30 minutes or more with internal battery

Rechargeable battery with operating time of 6 hours or more at the rate of 5 ml/hr

0 to 100 cm H2O

Up to 120 bpm

2-2000 ml

Adult, Paediatric, Neonates and Preterm babies

+/- 12 degree continuous dampened tilt

Servo and Manual Control open care Warmer

Inbuilt X-Ray Tray

Recessed heater head with no overhead heater

Ceramic / quartz / Calrod / Inconel heater with less than 750-watt power consumption

Greater than 3 minutes with 100% power

Aimable procedure light with intensity of 2000 Lux; non-touch based Dimmable Examination Light

30-42 Celsius (baby mode 34 to 38 C with resolution 0.1 C)

-20°C to -22°C

2°C to 6°C

Vascular Access Probes (Linear/Phased array probes for vascular access guidance)

Digital (LCD) Timer for monitoring therapy hours & lamp usage hours

Three / Four castors; two or more castors provided with brakes

Mobile on wheels with easily lockable wheels

450 - 460 nm, free from UV and IR radiation

220-240VAC, 50Hz

Single phase, 230V, 5 A

220-240Vac, 50-60Hz

220V-230V, 50Hz AC Supply

230 Volts AC, 50Hz

Fan less technology

At least 175 x 375 mm or more

Tubes disconnect, leaks, tube blockages, water out and hardware fault with error codes, audible power failure alarm

Audio Visual high and Low temperature alarms; Door Opening alarm

21 to 100% with inbuilt Air/O2 blending and FiO2 monitoring

2 - 70 litres

Inbuilt heated humidifier

Supplied with 10 units of disposable patient circuit with humidifier chamber

Crank Handle (Qty. 1) free of cost, Stainless Steel I.V. rod (Qty. 1) free of cost

With X-Ray Scatter Shield

1000ml measuring Jug (Euro design) having marking from 100-1000 ml

Main Unit integrated system with inbuilt thermal printer, Heavy Duty Treadmill, Servo Stabiliser, Pneumotach Sensor, Seal tight mask (Large, Medium), Laser Printer, Chest Electrodes, Calibration Gas Cylinder 6 Ltr

SS loading carriage 2 no transfer trollies and 01 no carriages (Total 3 no)

Suitable for treatment of Hypoxemic patients with respiratory distress in ICU, wards, and home oxygen therapy (Infants, Neonatal, Paediatric & Adults)

DCR

1500 RPM Diesel Engine of suitable BHP

SITC of Auto main failure (AMF) Panel fabricated from CRCA sheet steel 1.6 to 2 mm Thick, Powder coated finish, PLC/Relay Based

AC Brushless SPDP Alternator mounted on a common base Frame

Less than 75 dBA at a distance of 1 Mtr

Maximum noise level should not exceed 55 dBA

Optional

At least 150 or more animal scan preloaded data for comparative study with the human body

Capabilities to open CT/MRI data and USFDA is Mandatory as it is important for surgical planning usage

Removed

Question bank pre-loaded with quizzes, MCQ, dissection/interactive quizzes & short answer assessments, with the possibility of generating multiple students scores automatically during assessments

Optional

±2% or better

0.1 to 5 ml/hr

Microprocessor controlled

0.1 ml/hr – 1500 ml/hr (0.1-200 ml/hr with increment of 0.1ml/hr or less; 200-1500 ml/hr with increment of 1ml/hr or less)

Rate Mode, Time Mode, Dose Mode, Intermittent Mode and Drug Library for 100 or more drugs

0.1 to 1500 ml/hr (manual and auto bolus facility, with anti bolus function)

Automatic Syringe Size detection for 5 ml, 10 ml, 20 ml, 50ml

CMOS full color camera with integrated bright light source

Rechargeable Lithium polymer Battery with 60 minutes operational time, charging adapter supplied free of cost

Li-ion rechargeable battery, > 200 exposures per charge

Battery Status Indicator, automatic White Balancing

Adult & Pediatrics

Macintosh blade 1 size - 2 Nos., Macintosh blade 2 Size - 2 Nos., Macintosh blade 3 Size - 2 Nos., Macintosh blade 4 Size - 2 Nos., Macintosh D blade 4 Size - 2 Nos.; robust anti-fogging property

TFT/LCD or better >= 7.5 inch (diagonally) with stand, connecting cable of at least 2 meters or wireless

1.9 kva inverter with chargeable system

Diesel

4x2

Not less than 100 HP

Manual

Minimum 02 nos., stainless steel body

Disc brakes/ Drum Breaks

Minimum 01 no., RF sealing, sealing time < 2 sec, battery operated (min 1000 seals), CDSCO approved

Minimum 2 couches, non-motorized, lifting capacity at least 150 kg

Two additional resting beds (foldable) for donors with mattress

Minimum 01 no., capacity of minimum 100 bags (450ml), +2°C to +8°C, CDSCO approved

Minimum 02 no., battery backup > 8 hours, oscillation 12±2 rpm, CDSCO approved

Minimum 06 personnel including driver and co-driver

Push handle to move and hold the trolley easily with minimum effort

fibre handle

4-inch premium heavy duty hard PU wheels with two wheel braking system

Red, Yellow, Black bins with same color pedal

45-55 Ltr each bin

HDPE material

ISO 13485 from IAF accredited body

AERB approved

USFDA approved

Pipe diameter 25mm, 18G

four section top of perforated CRCA sheet duly machine press bent

pretreated and epoxy powder coated

Chromium Plated

ISO 13485:2016 certified, CDSCO License

Back rest and knee rest section maneuvered by two separate screws; crank shaft manually operated with foldable handle on both shafts

MS 16 gauge or below (equals to or less than 16 gauge) & 1.25 inches diameter

Collapsible side railings

at least 4 Nos. hooks on bed frame on both sides for holding urine/drainage bag

minimum 18 gauge or below

at least 150 kg

up to 2 kg

provision for four saline locations

Lead-free U-PVC material with IS4985 (Grey & Transparent), min radius 800 mm, sustain min 1 bar pressure

Impact resistant and crystal clear polycarbonate/acrylic middle body

Plummet Charge Terminal/Standard Top Loading Station, Crown Charge Terminal/Compact Bottom Loading Station, Varied Charge Terminal/Multi Send Station, Obtaining terminal/Horizontal Lab Receiving station

Verge passage blusterer with aerate circulate transpose element/side channel blower unit, 3-phase power supply, frequency 50-75 Hz, CE/ISI certified, with variable frequency drive, silencer, filters, dampers

Disport unit/Diverter unit with optical sensor, servo motor, TCP/IP or RS232/RS485

7 inch capacitive touch screen

up four-six meter per second

IS and CE standards

Latest processor Intel or AMD CPU with SMPS Cabinet, Min 8GB RAM, Min 480GB NVMe, Min 2 USB 3.0 Ports, PCI Slot for ISDN/Modem Card, Ethernet 100/1000 Lan Card, 22 Inch Monitor, Wireless Keyboard and Wireless Mouse

TCP/IP protocol, min speed 10 Mbps to each component

160 mm

At least 10 years from date of commissioning

upto 1 to 2 seconds

1.5 mm Al or more

RVG Compatible

Sturdy compact mobile trolley, 3/4 adjustable shelves with drawer

T-Scan, Craniofacial Electromyography, Transcutaneous Electrical Neural Stimulator, Jaw Tracker, Joint Vibration Analyzer, Computer / Laptop, T-Scan-EMG Link, Trolley

Link between T-Scan and Biometrics software, simultaneous recording, time sync, auto playback sync, auto patient file creation

Chair side Digital Occlusal Analysis system; handheld device with autoclavable detachable sensor support (2 sizes, 2 nos each); USB connectivity cable length >= 2 mtr; 20 large and 20 small sensors (thickness <= 0.1 mm)

2D and graphical display, color representation, video playback with play/pause, Windows compatible

8 Channel Craniofacial EMG, records 1-500 micro volts, amplifies signals up to 5000 times, supplied with 100 nos electrodes, compatible with Windows 7 or above

Core i7 or higher processor, 16 GB RAM or higher, 1 TB SSD, 14 inch screen or higher, Windows 10 64-bit

Confident Dental Equipments

Schiller A.g

Flash X-Ray

Twincubator

GT Blot 48

Gama Healthcare Rediroom

Cardiovit CS—200 Excellence ErgosPiro

System 8 Sternum SAW

SURGISTOOL II

AMSCO 400 Steam Sterilizer

Provision to fix 5 baskets to store bottles

Self/auto Defrost function should be available

Stainless Steel 304 Interior

Capacity to cool 15 litres water in assorted sizes (50 to 200 ml plastic/glass bottles) at 10°C to -20° C in 24 hours

Compatible Voltage Stabilizer (2 kVA) of standard Brands/ISI Mark

Continuous operation in ambient temperature of 0 to 50°C and relative humidity of 15 to 90%

PUF insulated steel sheet sandwich construction

General [ Adult and Pediatric]

Semi automated Cuff, Automated Cuff

The technical specification attached in ATC, shall be final.

Upper Arm Digital Blood Pressure Monitor, Wrist Digital Blood Pressure Monitor, Kiosk type Digital Blood Pressure Monitor

Yes

Yes

70 cm or more

Zero boil off rate, Helium only

Actively shielded, gradient strength 44 mT/m or more along each axis, slew rate 200 T/m/s in each axis

At least 140 kg load capacity

MR safe infusion pump, MR safe multi-parameter vital sign monitor, MR compatible anaesthesia machine, UPS (30 min backup), 250 KVA silent DG set, chiller and RF shielding

32 independent RF receiver channels

Client-server architecture based solution, minimum 40,000 concurrent slices, 5 concurrent user licenses

3.0 Tesla (superconducting)

Commonly required filter 405nm, 450nm, 630nm (Space for optional filters)

Built in thermal/matrix printer

Fully automatic & easy to operate

Totally open system

Desktop computer (i3 processor, HDD 1 TB, 4GB RAM, 17" screen) with compatible UPS provided free of cost

Halogen Lamp/LED should have minimum warm up/idle option

0 to 4.0

Able to read strips or plate at a time

Facility to measure at single as well as dual wavelength (Bichromatic reading)

Able to read all kind of wells flat, V and U

Two 2 liter wash bottles and waste bottle with level sensor

USB/RS-232 port for easy data transfer

Should provide aerosol cover to prevent aerosols of infectious diseases from spreading

Capability to wash 96 well micro plates

Less than 2 µl

50-300 µl for 96 well

Programmable washing time, volume and soaking time

Stainless steel, scratch resistant, perforated, roll out type, at least 4 or more

A refrigerator for storing whole blood, designed specifically for blood bank use

TB Containment Lab & LPA Section IRL

CFC-free refrigerant / green gas

Full load at +4°C (±1°C) takes >1.5 hours to rise above +6°C on power off without opening door at 25°C room temp

Full load at +25°C takes max 6 hours to reach +6°C

240V 50 Hz Single phase AC; supplied with external Servo Voltage Stabilizer (input 90-280V, 50Hz)

+10°C to at least +40°C (±2°C)

Red

Forward oblique

30 cm

26.25 cm

4mm

0.2mm

M/s RZ Medizintechnik GMBH Germany

M/s Hain Life Sciences GMBH Germany

M/s Hain Life Sciences, GMBH Germany

M/s Stryker Corporation USA

M/S Stryker Corporation, USA

7025009

1003[1

1x2

Straight 0.5mm

Cusco Pattern

Foerster's Pattern

Set of 6

Side lock

Blunt tips

7mm

Fine & medium tapers

45 degree

Privacy window, in-built PPE station, travel locking pin

HEPA 14 and carbon filters to remove 99.995% of particles as small as 0.3 microns from the air

Automatic Deployable Mobile Patient Isolation Room

Quick deployable patient isolation room with negative airflow

Class I Medical Device

Deployed and made operational by a single person in under 5 minutes

Minimum 210 cm Height x 275 cm Width x 340 cm Depth

Minimum of 12 Air Changes per Hour (ACH)

Hands-free foot pedal operated entry and exit options

Shall not exceed 140 cm Height x 75 cm Width x 80 cm Depth

Integrated 12 lead exercise ECG with full disclosure; 16 lead ECG acquisition and analysis for Resting ECG and Exercise ECG; sampling frequency 8000 hz or more samples/second; frequency range 0-370hz; input impedance > 100mohm

M/s Schiller Healthcare India Pvt. Ltd., Mumbai

M/s Stryker India Pvt Ltd., Gurgaon

M/S Stryker India Pvt. Ltd, Haryana

0 to 350 l, Accuracy: +/- 3%

0 to +/- 22 l/s, Accuracy: < +/- 3%

Variable orifice Pneumotach Sensor

Vertical Reciprocating Sternum Blades: 30 Nos; Redo Oscillating Saw Blades: 30 Nos

Qty 2; Autoclavable accommodating all handpieces and attachments

Qty 1 No; Free speed 10000-12000 CPM; Microprocessor controlled; Noise level <= 84 dB; Weight with battery <= 3 lbs; 360-degree rotation blade mount; DC brushless motor; Autoclavable; Blade arc excursion up to 5 degrees

Qty 1 charger with 4 batteries; 220-240 V; 4-battery simultaneous charging; Li-ion 9.9 V, 2.2 Ah; Weight <= 0.9 lbs; Run time min 21 minutes

Qty 2 No; Free speed 1000 to 13000 CPM; Weight with battery <= 3.0 lbs; Microprocessor controlled; DC brushless motor; Pistol grip; Tool-less mounting; Noise level <= 84 dB; Autoclavable; Supplied with 2 sternum guards

Teardrop seat and Thermoformed plastic hood

Multi articulated arm rests

High 28.5" (72 cm), Low 21" (53cm)

Dual-density foam seat cushions

One kick Front-end locking system

Adjustable

Up to 300 lbs

35 x 35 cm (+-5cm)

15cm to 30 cm

High 30.5" (77 cm), Low 23" (58 cm)

Pneumatically / electrically operated vertical sliding / hinged door double door (316L or better) with durable non-lubricated steam activated door seal

Stainless steel / Copper or better with pneumatically / electrically operated piston valves

Adjustable cycle time less than 45 minutes

Inbuilt vacuum pure water ejector system with bacteria retentive filter or HEPA filter

200-300 litres double door, at least 2 STU or More

Microprocessor/PLC controlled steam under pressure, free standing sterilizer autoclave

Inbuilt or stand-alone unit with 30L or more capacity, SS 316L / Carbon steel with 30-50 mm mineral wool insulation

Double jacketed rectangular 316L grade St. Steel chamber or better

380 to 440 V, 50 Hz, 3 phase

134°C pre-vacuum wrapped instruments/Porous Load; 121°C rubber, plastic, heat sensitive material; 121°C liquid cycle; Bowie & Dick; Leak test

Minimum 40,000 working hrs or more

Counter balanced mechanism, freely rotatable at any angle (360 degree)

At least 1,00,000 lux at a distance of 1 meter for each dome

Variable (3800 to 4500 degree K)

Above 20 cm or better

Light dome shall be compatible for laminar air flow

CE certified, ISO 13485 certified manufacturer, IEC 60601-1, IEC 60601-2-41